Sweatband
Materials:
1 clean washcloth
2 inches of elastic
scissors
needle and thread (I used a sewing machine but you could stitch it by hand)
Cut your washcloth into 1 in. strips, they don't have to be perfect. Cut 6 total strips. Lay two of the strips end to end and stitch them together so you get double the length. Do this with the other 4 strips so you have 3 extra long strips of washcloth.
Stack the 3 strips together. Take your elastic and lay it vertically at the end of the strip. Stitch the elastic onto the stack.
![]() |
A sewing machine makes this project super easy |
Braid the 3 strips tightly |
Once the strip is braided, wrap it around your head to measure. You want the braid to be about 3in. smaller than your head, I had to trim mine a bit. Now just bring the elastic around to meet the end of the braid. Stitch in place.
![]() |
It helps if you pin the elastic to the other side to hold it in place while sewing |
![]() |
Don't I look fab? |
1 comments:
This is so cute Katie!! :) LOVE it - going to post it on the fb page :)
Post a Comment